SM-X5 All In One Solar Street Light is better than normal LED Street Lights for it is depart from the utility grid, requiring much less maintenance compared to conventional street lights. Its solar panel can absorb energy from the sun and turn it into area illumination when it is dark. Since it has no external wires, the risk of accidents is greatly reduced. Also, SM-X5 All In One Solar Street Light is competitive for its super aluminum frame, which is light weight, strong and corrosion resistant, making it able to resist strong typhoons of up to force 12. The modular structure of the SM-X5 is extremely good at protecting essential parts of the streetlights. It reaches IP65 protection grade, effectively isolating humidity, dust and heat invasion, making it easy to overcome the challenges of harsh outdoor environments. What’s more, SM-X5 comes complete with built-in motion detection system that automatically regular the light source from full bright (100%) to dim mode (25%) to increase battery autonomy, with the help of it, drivers are more easily to identify the different signs and reducing the incidence of traffic accidents becomes more effectively.
SM-X5 All In One Solar Street Light Features
Detailed Parameters
Environment
Altitude and distance parameters
Openings on post
Installation
Trouble shooting
No. |
Symptoms |
Troubleshooting steps |
Process |
1 |
No light at night |
Check that the lamp can be manually activated. |
Refer to “Activation and Installation” section on this user guide and run activation tests. |
Check if the solar panel is blocked from the sunlight by houses, trees and other obstacles. |
Clear obstructions or change installation location. |
||
Check if there is any artificial light source(s) shining on the solar panel during the night. |
Remove the artificial light source(s) of interference or change the installation location. |
||
Examine status of each component based on the repair guide. |
Replace the damaged component(s). |
||
2 |
A series shortage of working time |
Check if the solar panel is blocked from the sunlight by houses, trees and other obstacles. |
Clear obstructions or change installation location. |
Check if the surface of the solar panel is dusty or covered. |
Clean the surface of solar panels as detailed above. |
||
Examine if the battery pack is damaged as per the repair guide instruction. |
Replace damaged battery. |
||
3 |
Lighting does not follow the normal operating mode of turning on and off. |
|
Replace damaged battery. |
4 |
Lights fail to turn on properly when humans approach. |
Check if the air temperature close to human body temperature. |
When the air temperature is close to human temperature, motion detection may slow down. It will return to normal after the air temperature changes. |
Check if the installation height is too high. |
It is out of motion detection range when installation height exceeds 8m. It is recommended to reduce the height or use other operating modes. |
||
|
Replace damaged motion sensor or controllers. |